ஐ.எஸ்.எஸ்.என்: 2161-0398
Gole JL and Laminack W
We present a short review and novel approach for the construction of conductometric sensors demonstrating considerably higher sensitivities than traditional metal oxide sensors. Sensor platforms do not require film-based technology, operate at room temperature, and can be obtained without the use of time consuming self-assembly processes. A combined nanopore coated micro-porous array, is deposited with nanostructure directing acidic metal oxide island sites which vary in their Lewis acidity, decorate the micropores, and control an electron transduction process. The interaction of analytes with these island sites varies in a predictable manner and can be modified through in-situ functionalization of their Lewis acidity through formation of the oxynittrides or oxysulfides. Microporesallow rapid Fickian diffusion of the analytes to the active nanostructured island sites whose reversible interaction with the analyte dominates the sensor response. We require only that the island sites be deposited at sufficiently low concentration so as not to interact electronically with each other. Highly accurate repeat placement of the nanostructured island depositions is not required. The nanoporous walls of the microarray act as a phase match for the deposition of a diversity of nanostructures that are selected for deposition from a variety of solution-based sources and the forgiving deposition process requires a minimum of energy consumption and time. Comparisons to a variety of metal oxide systems are considered. Observed sensitivities and the sensor system reversibility can be predicted from the recently developing IHSAB model.